Buddy Rhodes™ Penetrating Sealer

BRSEALPENQT ⓘ 64fe17c1-69b8-46eb-88f7-e24b7a4328ac
Finish, Varnish & Coating

Provides a durable protective barrier against oil and water on concrete surfaces.

  • Chemically reactive aqueous copolymer
  • Effective on dense and porous concrete
  • Coverage: 9.29 m² per 0.95 l
  • Used as a primer for additional layers
exclamation.svg

Warning

H315 - Causes skin irritation.
H320 - Causes eye irritation.
€ 126.41

(€ 104.47 without 21% VAT)

In stock

Description

This penetrating sealer is an aqueous copolymer chemically reactive dispersion that creates a durable and transparent barrier against oil and water on concrete surfaces. Its chemistry offers invisible protection to both dense and porous concrete, making it highly effective as a water sealer.

It serves as a base layer of protection in case of a failure of the Satin Sealer or prolonged exposure to staining agents. It is also used as a primer for the next layer.

Coverage

  • Approximately 9.29 m² per 0.95 l

Instructions

Apply to clean, dry concrete free of dust, grease, and residues. Stir well before use.

Using a low-pressure sprayer, microfiber applicator, or roller, apply a thin, even coat—do not overapply or allow pooling. Work in manageable sections to ensure uniform penetration. Allow the sealer to absorb fully; remove any excess with a clean cloth.

For highly porous surfaces, apply a second coat after the first has dried.

Dry Time

  • 1–2 hours for initial drying
  • Full cure in 24 hours

Use as a primer before applying Satin Sealer. Clean tools with water immediately after use.

Available in Finish, Varnish & Coating
Product Cure Time Shelf Life Ideal Application Temperature Range Minimum Cure Time Before Clean And Set Application Minimum Dry Time Between Primer Applications Minimum Dry Time Between Finish Applications Mix Ratio For Primer Pot Life Mix Ratio Primer Non-Color-Enhancing Mix Ratio Primer Color-Enhancing Mix Ratio Finish Ideal Humidity Range Minimum Humidity Cure Time For Light Use Cure Time For Full Durability Primer Application Wet Time First Coat Primer Application Wet Time Second Coat Primer Application Wet Time Additional Coats Finish Application Wet Time Time Between Finish Coats Maximum Time Between Applications Concrete Cure Time Before Sealing Drying Time Before Sealing Recommended Reapplication Interval Minimum Drying Time After Saturation Recommended Cure Time Before Sealing
Buddy Rhodes™ Penetrating Sealer - - - - - - - - - - - - - - - - - - - - - - - - - -
Buddy Rhodes™ First Sealz - - - - - - - - - - - - - - - - - - - - - - - - - -
Buddy Rhodes™ ICT Reactive Sealing System 5-7 days 5-10 years 21°C-35°C 2 h. 30 min. 30 min. 1 part PS1 or PS1-LS to 1 part Water - - - - - - - - - - - - - - - - - - -
Buddy Rhodes™ Reactive Polyurethane Sealer - - 15.5°C to 32°C - - - - 45 min. to 1 h. 1 part urethane : 3 parts C : 4 parts water 1 part urethane : 7 parts water 1 part urethane : 3 parts C 50% to 65% relative humidity 40% relative humidity 36 h. 72 h. 10 min. 5 min. 1 minute 30 sec. to 1 minute 1 to 2 h. 24 h. At least 1 week Minimum 12 h. - - -
Buddy Rhodes™ Clean & Set - - - - - - - - - - - - - - - - - - - - - - - - - -
Buddy Rhodes™ ICT Low Sheen 5-7 days - 21°C-35°C 2 h. 30 min. 30 min. - - - - - - - - - - - - - - - - - 5-10 years - -
Buddy Rhodes™ Prep 5-7 days 5-10 years 21°C-35°C 2 h. - - - - - - - - - - - - - - - - - - - - 12 h. 7 days
Buddy Rhodes™ Satin Sealer - - - - - - - - - - - - - - - - - - - - - - - - - -

Why buy at FormX?

Subscribe to our Newsletter

Receive €5,- discount on your first purchase!

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.